WE
Extractor housing
Houses a chimney or built-in extractor above the hob. Hangs higher than the rest of the wall run so there is head and flame clearance over the hob, and is shorter by the same amount so the top of the run stays level.
About 12 min to buildmoderate
Dimensions
- Widths
- 600, 800, 900 mm
- Carcass height
- 720 mm
- Depth
- 330 mm
What is inside
- Adjustable shelves
- 0
- Drawers
- 0
- Doors
- 0
- Back panel
- Open back
What is included
- Every panel cut, edged and drilled — nothing to measure or mark.
- Soft-close concealed hinges and adjustable mounting plates.
- Adjustable wall brackets, so a run can be lined up true.
- Cam-lock fittings, shelf pins and every screw, counted and bagged.
- A removable label on every panel, and a QR code for the instructions.
Assembly
A cross-head screwdriver is the only tool you need. See the step-by-step instructions before you buy, if you would like to know what you are taking on.
- Joint system
- cam lock
- Tools needed
- Screwdriver